Lifestyle

DIY magnetic spice jars

Recently I bought this magnetic spice rack from Aldi:

Magnetic spice rack
Magnetic spice rack – BEFORE

Cute, huh? Unfortunately, when I opened it the package the magnets immediately fell off the board they were attached to, before I’d even placed the jars on there.

I decided to do a little hack and attach the magnets to the spice jars instead. This way, I can stick the jars directly on my fridge without the need for the stand. Problem solved – with the added bonus of saving some counter space! Although I did this using a pack from Aldi, you could easily make something similar using any small container, some strong magnets and glue. Here’s how:

  1. Wash and dry the spice jars thoroughly.
  2. Pry off the remaining magnets from the bamboo stand with a knife.
    Magnetic spice rack
    Magnetic spice rack – broken stand

     

  3. Stick one magnet to the bottom of each jar. While the magnet adhesive wasn’t strong enough to stick to the bamboo stand, it is more than strong enough to stick directly to the jars (though you could always use super glue for extra durability).
    Magnetic spice jars
    Adding the magnets to the jars

     

  4. Fill with spices and voilà – magnetic spice jars you can put straight on your fridge!
    Magnetic spice jars
    End result – cute magnetic spice jars!

     

Hot cross buns

Hot cross buns

Ingredients (buns):

  • 4¼ cups bread flour, sifted
  • 1 tab active dry yeast
  • ½ cup caster sugar
  • 1½ cups lukewarm milk
  • 2 tsps ground cinnamon
  • 2 tsps mixed spice
  • 1½ cups sultanas
  • 50g butter, melted
  • 1 egg
  • ½ cup plain flour
  • ⅓ cup water
  • Butter, to serve
  • Golden syrup, to serve

Ingredients (glaze):

  • 1 tab water
  • 2 tsps gelatine powder
  • ½ cup caster sugar
  • ¼ cup water, extra

Method:

  1. Lightly grease a 22cm square cake tin and line it with non-stick baking paper.
  2. Place the yeast and the milk in a large bowl. Stir in 2 teaspoons of the sugar and set aside for 5 minutes. The mixture will start to foam, indicating that the yeast is active.
  3. Add the remaining sugar, flour, cinnamon, mixed spice, sultanas, butter and egg to the yeast mixture and mix until a sticky dough forms. On a lightly floured surface, knead the dough for 8 minutes or until elastic. Place dough in a lightly oiled bowl, cover with a clean, damp cloth and set aside in a warm place for 1 hour or until doubled in size.
  4. Divide the dough into 12 pieces and roll into balls. Arrange the dough balls in the cake tin, then cover with a damp cloth and set aside in a warm place for 30 minutes or until risen. Preheat oven to 200°C.
  5. For the crosses, place the extra flour and the water in a bowl and stir to combine. Put the mix in a piping bag, and pipe crosses on the buns.
  6. Bake for 30–35 minutes or until golden and springy to touch.
  7. While the hot cross buns are baking, make the glaze. Add the water to a small bowl and sprinkle over the gelatine. Stir for 1–2 minutes or until the gelatine is dissolved, then set aside.
  8. Place the sugar and extra water in a small saucepan over low heat and cook, stirring, until the sugar is dissolved. Use a wet pastry brush to remove any sugar crystals on the side of the pan. Add the gelatin mixture and cook for 1–2 minutes or until the gelatin is fully dissolved. While the buns are still hot, brush them with the warm glaze.
  9. Serve buns warm with butter and golden syrup. Makes 12.

Everything you need for an Australia Day feast

Australia has beautiful wildlife and weather, an amazing music scene, and fantastic food. Aussies tend to celebrate these things on a daily basis, but this is especially true on Australia Day (26 January) when many have family and friends over for a BBQ, good tunes and beer on ice. How about complementing your BBQ feast with some traditional Aussie treats?

Damper
Damper
Anzac Biscuits
Anzac Biscuits
Pavlova
Pavlova
Cheesy Vegemite Scrolls
Cheesy Vegemite Scrolls
Lamingtons
Lamingtons
Steak Pie
Steak Pie

To my overseas followers, I recommend putting these Aussie favourites on your ‘must try’ list! Want something more whimsical? Try one of these amazing Aussie creations:

Australia Day Ice Cream Cake
Australia Day Ice Cream Cake
Fat Mum Slim
Giant Iced Vovo Cake
Giant Iced Vovo Cake
Taste.com.au

Malt Collective is now on Bloglovin’

Follow Malt Collective on Bloglovin }

I’m working on some new great recipes and DIY projects which I’ll post soon. In the meantime, see my Pinterest boards for inspiration:

Canapés & Entrées
Canapés & Entrées
Om Nom Nom
Om Nom Nom
Sweet Tooth
Sweet Tooth
Home interior design ideas
Interior Design
Landscaping
Landscaping
DIY projects
DIY Projects

Quick and easy exterior light makeover

Since buying our home I wanted to replace the gaudy exterior sconce lights that came with it, but I didn’t want to spend $200 on new lights. Thanks to some inspiration found on Pinterest, I decided to revamp the existing lights, and I’m so happy with how they turned out! This makeover only required soap, water, spray paint and privacy screen film, and cost less than $30.

Light before Light before Light before

One of the exterior lights before its makeover – tarnished and cheap looking

I started the project by unscrewing and disassembling as much of the light fixture as I could. These porch sconces are generally easy to take apart. Simply unscrew the top and bottom points, and the little nubs, to remove the brackets that hold the glass in place. If you have trouble, use pliers to loosen any rusted parts. Once you have removed all the unfixed components, you will need to deal with the part of the sconce that is hard-wired to the wall. You have two options here:

Option 1
Disconnect the power (very important!) before handling any electrical wires. Once you are sure the power is off, remove the light fully (seek help if needed). Before removing the sconce from the wall, make note of which wire connected to what (use labels if you need to) so you can reconnect it later without any trouble.

Option 2
I didn’t feel comfortable with handling the wiring, so instead I sprayed the wired part of the sconce while it was still attached to the wall. Remove the sconce from the wall and leave the wiring as is (your sconce can dangle from the wires). Remove the light bulb. Thoroughly clean the sconce with warm soapy water and a toothbrush. Once it has dried, completely cover the surface area (all around and behind the sconce) with newspaper. Make sure you use enough newspaper to protect your wall from any paint splatters!

Newspaper to protect the wall
Adding newspaper behind and around the sconce to protect the wall

Once the light has been carefully disassembled, clean all the parts and glass panes with warm soapy water. After you’ve carefully taken the porch sconce apart, get some soapy warm water and just clean up the pieces to get off all the dust and residue. If it’s rusty or tarnished, lightly sand or scour the surface before painting.

Once your pieces are clean and dry, take them outside and lay them out on an old dropcloth or cardboard. Time to paint! I used Rust-Oleum 2X Ultra Cover Paint + Primer in Gloss Black, which is a primer and paint in one. Rust-Oleum have a lot of different finishes like hammered copper and brushed nickel (great for matching with other hardware). If you use general paint I highly recommend you apply primer first to ensure the end result has a nice finish and is durable. Make sure the paint you select is the right kind for the material you are painting.

Do several light coats and spray your light in a continuous movement, otherwise the paint may drip or show splatters. My lights required about 3 fine coats.

Apply spray paint

Let it dry completely for a few hours before you put it back together. While you’re waiting, you can frost the glass pieces. I bought some adhesive privacy frost window film from my local hardware store. It came on a roll and was very easy to cut and apply.

Adhesive privacy frost

Once all parts are dry and complete, carefully put the sconce back together. If you completely removed the fixture, remember to make sure the power is off before reattaching the sconce to the electrical panel. And there you have it — a quick and easy exterior light makeover!

Before and after

%d bloggers like this: